Installation manual

Asante SNMP MacAgent Installation and Configuration
Use the Custom Installation option in Asante EtherTalk Installer Version 5.5.1 to
install Asante SNMP MacAgent and Apple MacTCP 1.1.1 software.
1. Select and double-click the Installer icon.
2. Click on the "Customize" button.
3. A list of specific software that can be installed appears. Hold down Shift key and
select both the appropriate Asante SNMP MacAgent (System 6 or System 7) and
MacTCP (or select only SNMP MacAgent if you do not wish to install MacTCP 1.1.1 if
you have a newer version. MacTCP is required for SNMP MacAgent operation).
4. To select a drive other than the active startup drive, use “Switch Disk”
5. Click the "Install".
6. Restart your Macintosh.
1. To configure your SNMP MacAgent, choose Control Panels from the Apple Menu and
click on the SNMP MacAgent icon. In the SNMP MacAgent window, edit the necessary
information and click on the Close box to save it.
2. To configure MacTCP, choose Control Panels from the Apple Menu and click on the
MacTCP icon. For further information on this process please refer to the Apple
MacTCP Administrator's Guide (available from Apple or Asante. This manual is
included with our AsanteView Management Software). In the MacTCP window, edit
the appropriate information and click on the Close box to save it and restart your
Macintosh system.
----------------------------------------------------
Net Utils Installation
Asante TroubleShooter and ADLS diagnostic software is a Self-Extracting Archive.
To Install these applications on a system hard disk:
1. Select and double-click the Net Utils.sea icon.
2. Select the destination. (Do not Save to the floppy.)
During the installation of these applications a folder named Net Utils Folder is
created containing TroubleShooter and ADLS.
----------------------------------------------------
- 6 -