Installation manual

Before using the Asante EtherTalk Installer software, we recommend that you quit
all applications and temporarily disable any extensions, inits and anti-virus
software. Then, re-activate the software after the installation is complete. To
disable extensions when using System 7, hold down the shift key during startup.
When using System 6, move extensions and inits from the System Folder or use a
System Startup disk.
Information contained in this document may not be included in the product
installation manual.
Asante MacCon Ethernet controllers are compatible with:
• Apple Macintosh System Software 6.0.7 and above
• All Macintosh and Performa computers with the appropriate expansion slot
Asante Micro EN/SC family of Ethernet adapters are compatible with:
• All Macintosh PowerBooks, including the new PowerBook 5xx Series, Duo Docking
Stations and Duo MiniDock and other third party docks with SCSI ports
Asante Mini EN/SC family of Ethernet adapters are compatible with:
• Apple Macintosh System Software 6.0.7 and above
• Macintosh Plus, Classic, Classic II, Color Classic, LC, LCII, LCIII series, SE, SE/30,
II, IIx, IIcx, IIsi, IIci, IIvx, Performa 200, and 400 series computers
Asante EN/SC family of Ethernet adapters are compatible with:
• Apple Macintosh System Software 6.0.7 and above
• Macintosh Plus, Classic, Classic II, Color Classic, LC, LCII, LCIII series, SE, SE/30,
II, IIx, IIcx, IIsi, IIci, IIvx, Performa 200, and 400 series computers
NOTE: The EN/SC and EN/SC PB are not compatible with the Macintosh IIfx, 68040
computers, including LC475, 575, Centris or Quadra series computers.
Asante SNMP MacAgent requires:
• Apple MacTCP 1.1.1 installed on your system
• Asante Ethernet software drivers to collect SNMP statistics
• Macintosh System Software 6.0.7, and above. We recommend that you use System
7.x
----------------------------------------------------
"Easy Install" Installation - Asante Ethernet Adapters
- 4 -