Installation manual

Summary of Asante EtherTalk Installer 5.6.0 Updates.
Asante Software Driver Changes with EtherTalk Installer Version 5.6.0
•ComSlot Driver 2.0.2 : add software reset to fix receiving turns off problem.
•Add FriendlyNet PC card driver 2.0.1 with promiscuous mode to support EtherPeek.
•If installer detects card services and no ENSC product , "Easy Install" will remove
any other ENET0 driver with ID=28, if it is found in the System file , and then install
the FriendlyNet PC card driver. "Easy Install" will also install EtherTalk Adev, if no
EtherTalk Adev is found in destination system folder.
•Add EtherTalk Adev 2.5.7 from System 7.5.2 installer (Good for all System 7.x.x
users).
•Add Custom Install for EtherTalk 2.5.2 for System 6 users.
Asante TroubleShooter 1.9.0 and ADLS 1.3.0
•Updated TroubleShooter 1.9.0 and ADLS 1.3.0 to support ENSC product on PB Duo
2300, Performa 640/630 with DOS card, PB190 and PB5300.
•TroubleShooter 1.9.0 and ADLS 1.3.0 will not support FriendlyNet PC card .
Asante SNMP MacAgent software
•Asante SNMP MacAgent software will not support FriendlyNet PC card .
----------------------------------------------------
Summary of Asante EtherTalk Installer 5.5.4 Updates.
Asante Software Driver Changes with EtherTalk Installer Version 5.5.4
•Updated to MacCon CS driver 2.0.0. Merged 10T and TN. Fixed transmit time out.
•New Installer script 5.5.4 supports MacCon CS on LC 575. Also install and remove
script modified to prevent removing any EtherTalk component.
Asante TroubleShooter 1.8.6 and ADLS 1.2.7
•Updated ADLS 1.2.7 to support MacCon CS on LC 575.
----------------------------------------------------
Summary of Asante EtherTalk Installer 5.5.3 Updates.
Asante Software Driver Changes with EtherTalk Installer Version 5.5.3
• Added driver EN/SC 6.0.3 for support to the Asante Desktop EN/SC.
Asante TroubleShooter 1.8.6 and ADLS 1.2.7
• Enhanced support for the Asante Desktop EN/SC.
- 2 -