User guide
Selecting a network connection
Once you have installed EtherTalk networking software on your
PowerBook, you must select the appropriate connection type in
the Network control panel before you can use it.
You can switch to a different network connection type at any time.
For example, if you have access to both a LocalTalk and an
Ethernet network (using EtherTalk), you can switch between the
two connection types.
1. Insert the PowerBook Duo into the dock and turn on
the PowerBook.
2. Choose Control Panels from the Apple (K) menu.
3. Double-click the Network icon to open the Network
control panel.
When the Network control panel opens, an EtherTalk icon
and icons for any other installed network connection software
are displayed.
4. Click the icon of the EtherTalk network connection.
A dialog box warns you that you may lose any network
services that you are using with your current network
connection. This means that you may need to reconnect to
the network services later.
5. Click OK.
6. Close the Network control panel.
You can now use the network connection you selected.
22