User guide

Installing networking system software

You use the Installer program and the system software disks that

came with your PowerBook Duo (or that you purchased as a

separate system software upgrade kit) to install networking

software on your PowerBook.

If your disks came with your PowerBook, the Installer program is

on the disk named Install Me First.

The following instructions describe how to install the networking

software you need.

1. Insert the PowerBook Duo into the dock.

2. With the PowerBook turned off, insert the

Install Me

First disk into the internal floppy disk drive.

3. Turn on your PowerBook Duo.

The Installer program opens automatically.

4. Click OK.

You see the Easy Install dialog box.

Make sure that the hard disk indicated in the box is the one

on which you want to install networking software. If a

different disk appears, click the Switch Disk button until the

correct disk name appears.

Depending on the version of your installation disks, you may

see slightly different information in this dialog box.