User guide

Checking your networking software If you have the EtherTalk and networking software already
installed on your PowerBook Duo, you can select a network
connection and begin using the network. If you don’t have EtherTalk or networking software installed on your PowerBook,
you can install it using the Installer program on the system software disks that came with your PowerBook Duo (or with a system software upgrade kit that you purchased). To check for networking software:
1. Insert the PowerBook Duo into the dock and turn on
the PowerBook.
2. Choose Control Panels from the Apple (K) menu. 3. Double-click the Network icon to open the Network
control panel.
(Depending on your system version, your Network control panel may look slightly different from the one pictured here.)
v If you can’t find the Network control panel: If no Network
control panel appears in the Control Panels folder, go to “Installing Networking System Software” in the next section and install the networking software. v If the name “EtherTalk” is displayed in the Network control panel, then the Ethernet software is installed. Follow step 4 and then go to “Selecting a Network Connection” later in this guide. If “EtherTalk” does not appear, the EtherTalk software is not installed. Follow step 4 and then go to “Installing Networking System Software” in the next section.
4. Click the close box to close the Network control panel.
19