User guide
5. Now connect any other equipment you have, such as an
external hard disk drive or printer.
Follow the instructions that came with the equipment.
If you are connecting a SCSI device, you’ll need an HDI-30
SCSI System Cable to attach it to the dock. See the section on
using SCSI devices in this chapter for complete information
about connecting such equipment to your PowerBook Duo
System.
6. If you will be using network services, connect your
LocalTalk (or other network) cable.
Follow the instructions that came with the cable, or check
with your network administrator. If you will be connecting
your Duo Dock II (or upgraded Duo Dock) to an Ethernet
network, you need to connect the dock to the Ethernet
network and check that your PowerBook Duo has the correct
networking software. See “Using your Duo Dock on an
EtherTalk Network” later in this guide.
Once you have connected all your equipment, the Duo Dock is
ready to use.
6