Installation guide

Backup Battery
Connector
Backup
Battery
Clutch
Cover
Clutch
Cover
!
Latch
Palm Rest Tab
6 PowerBook 3400 and PowerBook G3 (1997)
Step 12: Rotate the top of the grill
toward the front of the PowerBook.
Use your fingers to disconnect the
backup battery connector. (The
backup battery is adhered to the
grill with reusable adhesive. This
does not need to be removed from
the grill.)
Step 13: Grasp the area of the clutch
cover under the display. Using a
fingernail, pull up from the seam in
back and gently rock the clutch
cover until it releases. Pull the
clutch cover straight up, watching
to clear the bottom of the display
assembly.
Note: Familiarize yourself with the palm rest. This
section will have to be rotated into the area originally
occupied by the keyboard. Be carefull not to pull the
trackpad cable out of the connector as you turn over the
palm rest. Perform the next steps carefully.
Step 14: Grasp the right corner of the palm rest and gently but firmly
pull it up.