Installation guide

PowerBook 3400 and PowerBook G3 (1997) 3
larger than 4GB installed cannot be used in SCSI Disk Mode. One
can use this PowerBook with an internal drive larger than 4GBin
normal Macintosh mode. There is no workaround for reliably us-
ing such a PowerBook in SCSI Disk Mode. It is recommended
that one use an Ethernet connection to transfer files if necessary.
Installation Checklist
In addition to the new hard drive, the following items should also be
found in this PowerBook hard drive upgrade kit:
- (1) Disposable Grounding Wrist Strap
- (1) MCE Standard/Phillips Combo Screwdriver
- (1) Torx T8 Screwdriver
Installation Procedure
Caution: Electro-Static Discharge (ESD) can easily damage
electronic components. Before proceeding, ensure that you are
discharged of static electricity by touching a grounded metal
object and by properly securing the provided Disposable
Grounding Wrist Strap.
Step 1: Place your PowerBook on a hard, flat surface.
Step 2: If your PowerBook is on, turn it off. If the unit appears to be
off, make sure that it is not in Sleep mode.
Step 3: Completely unplug all cables from the PowerBook and remove
any PC Card modules from it.
Step 4: Remove the battery by
pushing the latch button in and
sliding the latch to the side. Pull the
battery completely out of the Power-
Book.
Latch Battery
!