User`s manual

1 Enter 2 to use a portion of the hard disk for Rhapsody.

The available partitions are listed on the screen. If a partition is too small

for installation, it is omitted from the list. If there are no acceptable HFS

partitions, you see an error message. Refer to Chapter 1 for information about

preparing your hard disk.

2 Select a partition to use for Rhapsody.

3 Enter Y to create an HFS (Mac OS) partition.

The partition will be created during installation and will contain

documentation that you can access while using the Mac OS.

After you confirm your selections, the hard disk is initialized. This process

takes a few minutes.

Installing the core OS

After the hard disk is initialized, you’re ready to install the files for the

Rhapsody Mach OS.

1 Enter 1 to begin the installation.

2 Make sure the Caps Lock key is not pressed.

IMPORTANT

This step ensures that your computer will restart with Rhapsody

after this phase of the installation process.

3 When prompted, press the Return key to restart your computer.

WARNING

All files on the selected partition will be erased during the

installation process.

Installing Rhapsody