User`s manual

How do I view diagnostic messages during startup?
Hold down the V key on your keyboard to start up the computer in
“verbose” mode.
How do I reinstall Rhapsody?
To reinstall Rhapsody, you need to restart your computer using the CD-
ROM.When the computer is set to start up using Rhapsody, it cannot use the
CD as the startup disk.
In order to start up from the CD, switch to the Mac OS, then restart the
computer while holding down the C key on your keyboard, as described in
Chapter 2.
If the Mac OS is not installed on your computer, insert the CD, then restart
the computer while pressing Command-Option-P-R. After you hear the
second start up tone, release these keys, then immediately hold down the C
key to start up the computer from the Rhapsody CD-ROM disc.
WARNING With this version of Rhapsody, reinstalling the software will
erase all files on the Rhapsody hard disk or partition.
15
Troubleshooting