User`s manual

Switching to Rhapsody
To switch from the Mac OS to Rhapsody, you must install the Rhapsody
control panel on your Mac OS system. You’ll use the Rhapsody control
panel to switch between starting up with the Mac OS and starting up
with Rhapsody.
To install the control panel, drag it from the Rhapsody CD to the Mac OS
System Folder. Then choose Control Panels from the Apple (K) menu, and
choose Rhapsody from the submenu.
After you’ve installed and configured the Rhapsody control panel, follow
these steps to switch from the Mac OS to Rhapsody:
1 Press the Caps Lock key.
2 Choose Restart from the Special menu.
3 When the computer starts up with Rhapsody, release the Caps Lock key.
11
Getting Started With Rhapsody
Click if you’re
installing on
the Mac OS
internal disk.
Click if you’re
installing on an
internal disk.
Enter the SCSI device
number of the disk where
you’re installing Rhapsody.
Click to save your
settings, then close the
control panel window.