Instruction manual

Page 34 Splash PCI Series v5.0 Install Manual
6. Select the model of your Xerox or Fuji Xerox copier from the
“Connected To” menu:
■ Select MajestiK for a Xerox MajestiK or Acolor 630 series printer/copier.
■ Select Regal for a Xerox Regal or Acolor 930 series printer/copier.
■ Select DocuColor 5799 for a DocuColor 5799 printer/copier.
■ Select DocuColor 5750 for a DocuColor 5750 or Fuji Xerox Acolor 620
series printer/copier.
Note: Be sure to select the correct copier model. If the wrong copier model is
selected Splash will produce incorrect output for print jobs.
7. Click OK.
To cause the Splash Server application to open automatically each time you start up
the Splash Server CPU, create an alias for the Splash Server application (select the
Splash Server icon and press Command-M) and place it in the Startup Items folder
in the Splash Server CPU System folder.
You have completed set up of the Splash Server. For instructions on how to use the
features of your Splash Server, refer to Chapter 2, “Using the Splash Server” in the
Splash Set-Up Manual provided on the Splash Server Software CD-ROM.
See the section “Splash Server On-Line Manuals” on page 43 for a list of
the Splash on-line manuals.
Copier Set-Up Notes
Disable the Built-In Auto Tray Switching Option in Regal,
Acolor 93x, and DocuColor 5799 Copiers
To avoid problems printing to Regal, Acolor 93x series, or DocuColor 5799 copiers
from Splash, you must disable the “Automatic Tray Switching” feature of these
copiers. To do this:
1. At the copier, press the yellow “Clear-All” button.
2. At the copier keypad, press *, 0, 1, 2, 3, * to display the Tools Mode window.
3. Under “Auto Tray Switching” select “Off”.