Instruction manual

Page 32 Splash PCI Series v5.0 Install Manual
Setting Up the Splash Server
When you start up the Splash Server application for the first time, you are asked to
provide the product registration number for the Splash Server software. To prepare
the Splash Server for printing:
1. Open the Splash Folder and double-click the Splash Server application.
A product registration dialog box appears.
2. Enter your name, the name of your company, and the serial number for the
Splash Server software. The serial number is located on the back side of the
Splash CD-ROM jewel case. Look for a number with the “SMT” prefix.
All alpha and number characters must be entered.
3. When you have entered the software registration information, click OK.
The Splash Server application initializes the PostScript interpreter used for
printing. This process may take more than a minute.
4. When initialization is complete, Splash prints a start-up page to the
printer/copier. The appearance of the start-up page confirms that the Splash
Server is functioning correctly, and is properly connected to the printer/copier.