Instruction manual

Page 26 Splash PCI Series v5.0 Install Manual
Client computers that print to Splash can run on System 7.1 or later. If you are
using System 7.1 or later on a Client Macintosh (with the exception of Power
Macintosh computers), always enable 32-bit addressing in the Memory control
panel before you use the Splash software.
If the startup disk has insufficient space, you can install the Splash Server
application on a second hard disk. To do this, perform two Custom Installations.
During the first Custom Installation, install the appropriate files, except the Splash
Server application, on your startup disk. During the second Custom Installation,
install the Splash Server application on your second hard disk. (See page 27 for
Custom Installation instructions. Refer to the Splash Reference on-line manual on
for a list of files to install.)
Easy Splash Server Installation
1. Insert the Splash CD-ROM in the CD-ROM drive on your computer. Open the
Splash Install folder. Double-click the Splash Installer icon.
The Splash Installer welcome screen appears.