Instruction manual

Page 24 Splash PCI Series v5.0 Install Manual
4. Connect the small end of the Splash Key to the ADB port on the back of
your Macintosh.
5. Start up the computer.
The Splash Server application runs normally when the Splash Key is connected to
the keyboard cable. To prevent unauthorized printing, remove the Splash Key from
the keyboard cable. This locks the Splash Server application until the Splash Key is
replaced on the keyboard cable.
IMPORTANT: If you remove the Splash Key from the ADB chain on the Splash
Server, be careful that you do not lose the Key, or you will not be able to use the
Splash Server.
Splash Key