Instruction manual

Chapter 1: Installing the Splash Interface Hardware Page 17
Chapter 1
Installing the Splash Interface Hardware
In this chapter:
Discharging Static Electricity........................................................... 18
Installing the Splash PCI Interface Card.......................................... 19
Attaching the Xerox Asset Tag to the Computer .............................. 19
Installing the Splash Memory DIMMs .............................................. 19
Installation for Power Macintosh 7300 or Power Macintosh 7600.... 20
Connecting the Printer/Copier.......................................................... 23
Splash Key.......................................................................................... 23
This chapter explains how to install the Splash Kit in your computer, and how to
connect the interface hardware to a MajestiK, Regal, DocuColor 5750,
DocuColor 5799, or Acolor printer/copier. Read the instructions in this chapter
completely before you unpack or install the card.
While your computer might appear slightly different from those illustrated on the
following pages, the steps for opening the case and installing the card are nearly
identical for all computers. Please refer to the manuals provided with your
computer for more model-specific information about how to remove the cover and
install add-on cards.