Instruction manual

Page 12 Splash PCI Series v5.0 Install Manual
To run the Splash Web Queue Management option you must install additional
system memory on the Splash Server computer.
If your Power Macintosh has the minimum required system memory (24 MB), turn
off system extensions and control panels that are not needed by the Splash Server.
See page 37 for instructions on how to do this.
IMPORTANT: Applications running on the Splash Server may respond slowly
while the Splash Server is processing print jobs. Avoid using other application
software on the Splash Server computer while the Server application is running.
System Notes
IMPORTANT: All of the sections and procedures that appear in this manual
assume that the Xerox printer/copier has been correctly installed, and is currently
functioning as a copier. In addition, the Xerox IFU Port Kit, part number
98K32870, must be installed in the Xerox MajestiK, Regal, DocuColor 5750, or
DocuColor 5799 series copier by a Xerox Service Representative. The IFU Port Kit
provides the connection port necessary for the Splash Server.
If there is a problem with the copier, contact Technical Support before you proceed
with setup of the Splash Server Kit.
Unpacking
Compare the contents of your Splash PCI Kit package with the packing list
provided in the Splash PCI Kit package. If any item is missing, contact Technical
Support. You must provide the Xerox asset tag number for your Splash Server Kit.
(See page 19 for information about the Xerox asset tag.)
Registration Card
Be sure to complete the Splash Registration Card and mail it to Splash Technology.
You will receive software upgrade notifications for your Splash Server.