User`s guide

To install the external video connector kit in a
Power Macintosh 5200/75 LC computer, or a computer
that looks like the illustrations in this chapter, follow the
instructions in this chapter.
Opening the computer
1 If your computer is on, choose Shut Down from the Special
menu, or press the Power key on the keyboard.
Keep your computer plugged into a three-hole grounded
outlet to ground the computer and protect it from
electrical damage.
Important To avoid generating static electricity that may
damage components, do not walk around the room until
you have completed the installation of the connector and
closed the computer. Additionally, move the logic board as
little as possible while it is outside the computer.
2 Turn the computer completely off by pressing the power
switch at the back of the computer.
5
CHAPTER
2
Installing the Apple External
Video Connector in a
Power Macintosh 5200/75 LC