Specifications

Power Mac G5 Take Apart - 77
Front Panel Board
• Peel the backing off the EMI shield gasket and apply the gasket to the bottom of
the shield, making sure the openings in the gasket align with the shield openings.
2. Thread the power button cable through the opening in the EMI shield and connect the
cable to the front panel board.
3. Insert the front panel board into the EMI shield, making sure the ports are fully seated
in the openings in the shield.
4. Install the front panel board and EMI shield on the inside front of the enclosure and
replace the two mounting screws.
5. Install the metal cap on the EMI shield.