Specifications

62 - Power Mac G5 Take Apart
Logic Board
12. Install the modem filter board and cable on the logic board.
13. Install the antenna board and cables on the logic board.
Note: Be careful when rerouting the two antenna cables and the modem filter cable
that they route under the black connector for the front inlet fan. Make sure that the
cables are in place behind all cable guides and that the modem filter cable routes out
through the correct opening in the PCI divider.
14. Connect the modem filter cable to the modem and install the modem on the logic
board.
15. Install the AirPort Extreme Card and Bluetooth card on the logic board and connect
their cables to the cards.
16. Install the memory DIMMs on the logic board.