Specifications

60 - Power Mac G5 Take Apart
Logic Board
5. Carefully tilt the logic board up and maneuver it out of the enclosure, making sure the
ports clear the enclosure openings.
Note: Perform the following procedures only if you are replacing the logic board with a
new logic board.
6. Remove the following from the original logic board (see individual procedures in this
chapter for detailed steps):
• Memory DIMMs
• AirPort Extreme Card (if installed)
• Bluetooth card (if installed)
• Modem (if installed)
• Modem filter board and cables
• Antenna board and cables
7. Disconnect the thermistor from the logic board.