Specifications

Power Mac G5 (Late 2004) Take Apart - 61
Media Bay Sensor Board
2. Pull the board forward slightly so that you can reach the cable connector.
Note: The board’s cable may be taped to the frame and therefore offer some
resistance. Carefully tug on the cable to release it.
3. Disconnect the media sensor board cable from the board, and remove the board from
the enclosure.
Replacement Note: Before installing the replacement board, apply the double-stick tape
included in the sensor board kit to the back of the board. Then reconnect the media sensor
board cable and press the board to the frame in the location illustrated below.