Specifications

Power Mac G5 (Late 2004) Take Apart - 38
Heatsink Cover
Heatsink Cover
Warning: The processor, heatsink, and logic board are a unit. Never separate the three, or
you will damage the modules and void the warranty. The only parts you may remove from
the unit are the heatsink cover and processor inlet frame.
Tools
This procedure requires the following tools:
• Two flat-blade screwdrivers
• Jeweler’s flat-blade scewdriver
In addition, you may need the following tools for removing the locking rivet:
• Mat knife or Xacto knife
• Cup hook
• Small wooden stick
Preliminary Steps
Before you begin, open the computer and lay it on its side with the access side facing up.
Part Location