Specifications

Power Mac G5 (Late 2004) Take Apart - 7
Serial ATA Hard Drive
Replacement Note: If you are replacing a hard drive with a new drive, transfer the four
guide screws from the sides of the original drive to the new drive. If you are installing an
additional drive, transfer the guide screws from the side of the hard drive bay to the drive.
Replacement Note: When replacing the top drive, make sure the guide screws align with
the middle slot of the drive bay, and then gently push the drive into the bay until it snaps
into place in the top position.
When installing a bottom drive, align the guide screws with the bottom slot of the drive bay
and slide the drive in until it snaps into place.