Specifications

58 - Power Mac G5 Take Apart

Air Deflector Sensor Board

Tools

The only tools required for this procedure are a long-handled and a short-handled Phillips

screwdriver. A small mirror to use in locating the board is optional.

Preliminary Steps

Before you begin, open the computer, lay it on its side with the access side facing up, and

remove the following:

• Front inlet fan assembly

• Processor(s)

• All AGP and PCI cards

• Rear exhaust fan assembly

• Front panel board cable

• Memory DIMM if it is in slot next to the power supply cable

• Power supply

Part Location