Specifications

Power Mac G5 Take Apart - 55
Power Supply
Procedure
1. Remove the black plastic caps covering the two power supply cable connectors.
Note: The caps fit tightly over the connectors. To remove them, rock the caps gently
forward and backward as you lift up.
2. Press in on the release latch on the first power supply cable connector and disconnect
the cable from the logic board. Repeat for the other power supply cable.
3. Remove the two screws that secure the power supply top cover, and remove the cover
from the enclosure.
Warning: Whenever the power supply cover is removed, be very careful not to drop
any screws into the power supply. Doing so could short out the unit.