Specifications
Power Mac G5 (Late 2005) Take Apart — Logic Board 117
Temporarily tuck the top cables into the openings in the media shelf so that they are out of
the way. Also tape or hold the bottom cables out of the way.
Note: You may nd a long strip of packing tape useful in securing the cables.
Angle the logic board into the enclosure so that the port edge goes in rst.
Warning: Be careful not to catch the battery on the edge of the case as you lower the logic
board into the enclosure. Also make sure the connector ends of the antenna cables are not
caught under the board.
Position the logic board on the three mushroom-head standos, aligning the ports with the
openings in the enclosure.
Slide the board toward the rear of the computer so that the logic board locks onto the
mushroom-head standos and the ports are fully seated in the back panel openings.
1.
2.
3.
4.