Specifications

60 Chapter 4
2 Plug the other end of the cord into an RJ-45 wall outlet or external hub that is connected to a
twisted-pair Ethernet network.
After you start up the computer, you need to configure the software for your network
connection. Your network administrator can provide the necessary information. You can also
get help configuring your network software using Mac Help (in the Help menu).
To configure your network settings:
1 Choose System Preferences from the Apple (K) menu and open the Network pane.
2 Show Built-in Ethernet.
3 Click the TCP/IP tab and enter information about your network. The default setting is
Configure Using DHCP.
4 Click Apply Now.
5 Close the System Preferences panel.
Ethernet port
(Twisted-pair
Ethernet)
RJ-45 wall plate
Twisted-pair Ethernet cable
Ethernet hub
or switch