Owner`s manual

10. Power on all the peripherals and then the computer.

If your ORB Drive is connected to a SCSI Host Bus Adaptor on a PC, proceed to sec-

tion 1.7. Congratulations! Your ORB Drive is ready to use.

PROBLEM! If you can not access your ORB SCSI Drive, refer

to Section 3, Troubleshooting.

If your ORB Drive is connected to a Macintosh computer, Proceed to section 1.8.

1.7 ORB TOOLS AND BACKUP UTILITY

SOFTWARE FOR PC

The ORB Installation Suite CD is used to install the ORB Tools when you are run-

ning Windows 98/95/NT.

ORB Tools does not support Windows 3.1x, DOS, OS/2 or other operating systems at

this time. You should visit our web site at www.castlewood.com for further updates.

Software Setup - Windows 98/95/NT

1. Insert the ORB Installation Suite CD into your CD-ROM drive.

2. To install ORB Tools, click on the Install ORB Tools option in the window that

just opened.

• If no window opens up when your CD-ROM is ready, double-click on My

Computer on the Windows desktop.

• Double-click on the drive icon for the CD-ROM.

• In the window that just opened, double-click on the file named Setup

(setup.exe) to initiate the installation procedure.

3. You will be prompted for information as the installation proceeds. Follow the

instructions on the screen.

4. The ORB Tools installation is complete after Windows has restarted.

INSTALLATION GUIDE