Owner`s manual

3
SECTION 1 INSTALLATION GUIDE
WELCOME TO ORB!
The ORB SCSI Drive offers you everything that you want in a portable, removable
disk drive – high capacity and fast throughput speed at an affordable price that can
be easily connected to your system using a SCSI interface.
1.1 INTRODUCTION
This installation guide provides detailed instructions, and illustrations, as well as
safety precautions that will help you to install your ORB disk drive. It is recom-
mended that you use this guide along with your computer and SCSI host bus
adapter card manual (if applicable), for you will need to refer to the manual during
the installation process.
1.2 SYSTEM REQUIREMENTS
Hardware:
PC –
Intel Pentium, AMD K6, Cyrix MMX
Mac – Power Macintosh with PCI or above, G3 and G4
Operating Systems:
PC –
Windows 2000, Windows 98, 95, 3.1x, NT 4.0 (SP4+), MS-DOS 5.0+
Mac – Mac OS 7.6.1 or later
1.3 HARDWARE/TOOLS FOR INSTALLATION
You may need a #0 Phillips screw driver to change your ORB Drive’s SCSI ID-.
You may require tools if you need to install an add-on SCSI host bus adapter card.
In this case, follow the instructions provided by the vendor of the add-on card to
perform this installation.
1.4 PACKAGE CONTENTS
The ORB SCSI Drive consists of:
ORB 2.2GB SCSI Disk Drive, Power Supply,SCSI
Interface cable, ORB Disk with Disk Case, ORB
Installation Suite CD , and ORB Owner’s Manual.
INSTALLATION GUIDE
Figure 1