Owner`s manual

15
USERS GUIDE
2.2 USING ORB DISKS
Disk Insertion Instructions
Push a disk straight into the ORB Drive with
your finger using an “in and down”
motion to ensure that the
disk is seated.
Figure 10
Disk insertion
Disk Ejection Instructions
You can eject a disk using the operating system, recommended, or
by pressing the Insert/Eject button on the front of the drive.
CAUTION: Do not try to remove disk by lifting up on the front
edge of the disk while it is in drive.
CAUTION: Do not move or transport the drive with the disk
installed. This can damage the heads and media. A disk
must not be in the drive when the drive is moved or shipped.
From Windows Desktop
1. Close all open applications and files on the ORB Disk before ejecting the disk
otherwise data could be corrupted.
2. From the Desktop, double click on My Computer.
3. Right click on ORB SCSI Drive Icon.
4. Select Eject.
5. Green LED will flash amber (Disk spin down and air purge cycle).
6. ORB Drive door will automatically open.
7. Disk will be ejected.
8. Remove ORB Disk.
9. Door will automatically close.
10. Place ORB Disk in protective ORB Disk case.
From Mac Desktop
1. Close all open applications and files on the ORB Disk before ejecting the disk
otherwise data could be corrupted.
2. From the Desktop, highlight the ORB SCSI Drive Icon and hold the mouse.
3. Drag the icon and drop it in the Trash Icon.