Owner`s manual

8. Terminate the SCSI chain.

A SCSI chain has to be properly terminated at both ends to ensure data integrity.

The last external device and the last internal device on the SCSI chain have to be

terminated. If you do not have any internal SCSI device, then your SCSI Host Bus

Adapter or your Mac’s main logic board has to be terminated.

The ORB SCSI Drive has built-in, automatic active termination. Therefore, if your

ORB SCSI Drive is the last physical device on the SCSI chain, you do not need to

manually set its termination. Otherwise, refer to the manual of the last physical

device on the SCSI chain for instructions on setting its termination.

9. To complete installing your ORB SCSI Drive, return to

Section 1.6, Step 8.

INSTALLATION GUIDE