Owner`s manual

INSTALLATION GUIDE

Make Non-Removable: Allows the user to set the ORB drive as a

fixed drive.

Scan Devices:

Performs a full system scan for ORB Drives

and identifies each drive’s system interface.

1.8 MAC DRIVER AND SOFTWARE INSTALLATION

The ORB SCSI driver has to be installed before Mac OS is able to mount your ORB

SCSI Drive. This will also install ORB Tools for Mac on your system.

Close all open applications and disable virus protection before

proceeding further.

1. Insert the ORB Installation CD into your CD-ROM drive.

2. Launch the installation by doing the following:

• double-click on the CD-ROM icon

• double-click on the MAC folder

• double-click on the file called ORB Tools Installer.

3. To install your ORB SCSI driver, follow the instructions displayed.

4. After the driver installation is completed, your ORB SCSI Drive

should appear as an ORB Drive icon on the desktop.

5. If the ORB disk is PC formatted, you can re-format it to Mac format

through the OS or ORB Tools for Macintosh.

PROBLEM! If you can not see or access your ORB SCSI Drive,

refer to Section 3,Troubleshooting.

Congratulations! Your ORB Drive is ready to use.

1.9 ORB TOOLS FOR MAC

ORB Tools for Mac is a suite of utilities included on the ORB Installation Suite CD

supplied with your new ORB Drive that expand its functionality.