Manual

45
Installing the Card in a Power Macintosh 7200, 7300, 7500, or 7600
Connecting the CD In cable to the card
21 Plug the other SCSI audio cable into the connector labeled “CD IN” on the far upper-left
corner of the PC Compatibility Card.
Use the cable with the thick plug that looks identical to the cable you
connected to the logic board.
Insert the cable’s smaller plug into the connector labeled “CD IN” on the PC
Compatibility Card.
Connector labeled “CD IN” on the PC Compatibility Card
Do not plug any cable into this middle
connector for these computer models.