Manual

284
Appendix D
Installing and configuring video software for DOS and Windows
For instructions on installing basic video software and selecting monitor types
in Windows and Windows 95, see Chapter 6, “Installing the PC Compatibility
Card Software.” This section provides information about ATI DeskTop (the
configuration program for Windows), configuring video in DOS, installing
special display drivers and utilities for DOS, and installing MPEG video
software in Windows and Windows 95.
Note: Not all of the features described in the ATI onscreen instructions are
supported by the PC Compatibility Card.
Configuring video software in DOS
To install and configure DOS video software for a multiscan monitor, follow
these steps:
1 In the DOS environment, insert the PC Compatibility Card–PC Utilities CD into the
CD-ROM drive.
Note: If you have already installed the MACH64 directory on your C drive,
you can skip ahead to step 5.
2Type the following:
E: <return>
CD\VIDEO\UTILITY <return>
INSTALL <return>
The Installer program’s main menu appears.
3Choose Utilities Installation from the menu.
Follow the onscreen instructions to install the MACH64 directory on your
C drive.
4When the installation is complete, press Esc until you exit the program.
5Type the following:
C: <return>
CD\MACH64 <return>
INSTALL <return>
The Installer program’s main menu appears.