Manual

4 In the list of network cards that appears, select “Network card not shown in list below,”
then press Return.
5Eject the disk and insert the floppy disk containing the NDIS2 driver. Press Return twice.
6 Insert the first disk again; then press Return.
7Enter a machine name, user name, and domain name.
8 Follow the onscreen instructions to finish the installation.
9 Restart the PC.
10 Make sure your files contain the following lines:
PROTOCOL.INI
[network.setup]
version=0x3100
netcard=MacNDIS,1,MACNDIS
transport=ibm$netbeui,IBM$NETBEUI
lana0=MacNDIS,1,ibm$netbeui
[protman]
DriverName=PROTMAN$
PRIORITY=ibm$NETBEUI
[MACNDIS]
DriverName=MacNDIS$
ProtocolDot2=F0
[IBM$NETBEUI]
DriverName=netbeui$
SESSIONS=20
NCBS=20
BINDINGS=MACNDIS
LANABASE=0
CONFIG.SYS (the lines must be in this order)
DEVICE=C:\NET\PROTMAN.DOS /I:C:\NET
DEVICE=C:\NET\MACNDIS.DOS
DEVICE=C:\NET\DLSHELP.SYS
273
Installing Network Client Software