Manual

This chapter contains instructions for installing and setting up the following
network software combinations:
ODI driver with the following protocols
m NetBEUI and IPX/SPX in Windows 95
m TCP/IP in Windows 95
m NetBEUI in Windows for Workgroups
m IPX/SPX in Windows for Workgroups
m Microsoft’s TCP/IP-32 IP in Windows for Workgroups
m Tr umpet WinSock in Windows for Workgroups (packet driver)
m Spry’s Air Series TCP/IP in Windows for Workgroups
m AppleShare for Windows in Windows for Workgroups
m Novell’s LAN WorkPlace for DOS TCP/IP software
NDIS 2.0 driver with the following protocols
m NetBEUI and IPX/SPX in Windows 95
m Microsoft’s TCP/IP and IPX/SPX in Windows 95
m NetBEUI and IPX/SPX in Windows for Workgroups
m Microsoft’s TCP/IP in Windows for Workgroups
m Client software for an OS/2 LAN Server in DOS, Windows, or Windows
for Workgroups
m Banyan Vines in DOS
Either the ODI or NDIS 2.0 driver with the following protocol
m NetManage’s Chameleon TCP/IP in Windows for Workgroups
Configuring the built-in TCP/IP Stack for PPP (modem) in Windows 95
If you are installing a protocol for use with an ODI driver, see “Installing
Protocols for Use With Open Data-Link Interface (ODI),” next. If you are
installing a protocol for use with an NDIS 2.0 driver, see “Installing
Protocols for Use With Network Driver Interface Specification (NDIS) 2.0,”
later in this appendix.
242
Appendix C