Manual

6Click the button labeled “Disable bi-directional support for this printer.” Then click OK.
If this button is not available, click OK; then go on to the next step.
7 In the Properties window, click Port Settings.
The Configure LPT Port dialog box appears.
8Make sure the checkbox labeled “Check port state before printing” is unchecked. Then
click OK.
If you are using a PostScript printer, you must also follow these steps:
9 In the Properties window, click PostScript.
10 Click Advanced.
The Advanced PostScript Options dialog box appears.
11 Make sure the checkboxes labeled “Send CTRL+D before Job” and “Send CTRL+D after
Job” are unchecked. Then click OK.
175
Setting Up the PC Environment