Manual

Installing the Card in a Power Macintosh 4400 or 7220

Connecting the Sound Out cable

16 Plug one of the other audio cables into the connector near the DRAM DIMM slots on the

Macintosh logic board.

You unplugged the original audio cable from this connector in step 13 (the

connector may be labeled “CD AUDIO” on the logic board).

You can use either remaining audio cable. Insert the cable’s larger plug into

the connector, and route the cable through the opening, under the support bar,

and over the top of the PC Compatibility Card.

Route the cable so that it passes under the support bar and through the opening.