Manual

Installing support software for DOS
The software on the PC Compatibility Card–PC Software floppy disk that came
with your PC Compatibility Card allows the card to work with the Mac OS
and Mac OS–compatible CD-ROM drives, networks, and other equipment.
To install the software, follow these steps:
1 In the PC environment, insert the PC Compatibility Card – PC Software floppy disk.
To switch to the PC environment from the Mac OS, press x - Return, or open
the PC Setup control panel and click “Switch to PC.”
2Type the following:
A:\SETUP <return>
Note: DOS and Windows commands documented in this manual are
formatted showing the command followed by
<return>. When you see this
format type the text and then press Return to execute the command.
3When you are asked to select an option, choose “I” for Install.
To choose an option, use the arrow keys to highlight it, then press Return.
4 When you are asked to choose a target drive for installation, choose “C” to install on
the C:\ drive. (This is the drive set up as the default for installation in the PC Setup
control panel.)
5When you are asked to select a target directory for installation, type the following:
\APPLE <return>
6When you are asked to select the DOS directory, type the following:
\DOS <return>
7Choose Yes to continue installation.
8Choose groups for installation.
By default all groups are selected. Follow the instructions that appear on the
screen for selecting or deselecting groups.
146
Chapter 6