(Installation) Instruction Manual

2Press the reset button on the logic board, and slide the logic board back into

the computer.

Note: When you press the reset button, some of your computer’s software

settings will change. You may want to open the control panels for the date

and time, keyboard, and mouse to make sure that they are set the way you

want them. For more information about working with control panels, see

Macintosh Guide, the on-screen help that’s available in the Guide (h) menu.

1 Press the reset button on the main logic board. Reset button

2 Gently but

firmly push the

vertical plate until the

logic board is solidly back in place.

Installing the PC Compatibility Card in a 5400 Series Macintosh Computer