(Installation) Instruction Manual

What you need
Before beginning the installation process, make sure you have all the parts
and tools that are necessary to install the card in your computer. To install the
card in a 5400 series Macintosh computer, you need the PC Compatibility
Card, the internal PC audio/video assembly, and the cable clamp. You also
need a Phillips screwdriver.
You won’t need the CD audio cables shown below. Also, the loopback cable is
only necessary if you plan to attach an external monitor to your computer.
Loopback cable
CD audio cables
Adhesive film
PC Compatibility Card
Internal PC audio/video assembly
Cable clamp
2
Chapter 1