User Guide

PowerBook G4 Inverter Board - 2
Procedure
1. With the computer on a soft cloth, remove the two identical screws from the clutch
cover that is next to the power adapter port, as shown.
2. Use a black stick to remove the clutch cover.
3. At the clutch, note the routing of the inverter cable (the black and pink wires). Without
straining the inverter cable, gently remove the Kapton tape from the inverter cable.
Disconnect the inverter cable from the inverter board.
4. Remove the two identical silver-colored Phillips screws from the right clutch. (Do not
remove the black screws.)