User Guide

PowerBook G4 Display Module - 5
5. At the right clutch, note the routing of the inverter cable (the black and pink wires).
Without straining the inverter cable, gently move it aside so you can access the two
silver-colored screws.
6. Remove the two identical silver-colored Phillips screws from the right clutch. (Do not
remove the black screws.)
7. Remove the Kapton tape, and reserve it for the replacement display module.
8. Disconnect the inverter cable, and lift the inner clutch mount out of the way.
9. Lift the top case up slightly from the display, and carefully slide the inverter cable out
through the hole in the top case.