User Guide

© 2003 Apple Computer, Inc. All rights reserved.
 PowerBook G4
Display Module
Replacement Instructions
The following instructions explain how to replace the display module on the PowerBook G4
computer.
Warning: Make sure you carefully follow these instructions, especially when
working near cables that attach to the replacement display module. If any of the
cables are damaged, the entire display module must be replaced.
Tools
• Soft cloth
• Torx T8 screwdriver
• #1 Phillips screwdriver
• Black stick (or other nonconductive nylon or plastic tool)
Note: To organize the screws you remove from the computer, use a tray with divided
compartments (such as a plastic ice cube tray).
Preliminary Steps
Before you begin, remove the following:
• Battery
• Keyboard
• Modem
• Bottom case
• AirPort Card (if installed)
• Logic board