User Guide

PowerBook G4 Logic Board - 4
5. Important: With the bottom case removed, be careful when turning over the
computer. Some components could become loose and fall out.
Warning: The cables connected to the LVDS (low voltage data signal)
connector are extremely delicate. Do not pull or pinch the LVDS cables.
Warning: Be especially careful when working near cables that attach to the
display. If any of these cables are damaged, the entire display module must be
replaced.
Turn over the computer so the display rests lightly in your lap. At the left
side of the logic board, disconnect the two-pin backlight connector, the LVDS
connector, and the six-pin audio connector.
Audio
Connector
LVDS
Connector
Backlight
Connector