User Guide

PowerBook G4 DVD-ROM Drive - 2
Procedure
1. With the computer on a soft cloth, locate the adhesive dust cover, a black plastic sheet
that holds the PMU and DVD ribbon cables in place.
Warning: The adhesive dust cover adheres to the thin, plastic DVD drive
sleeve. Removing the dust cover too quickly might cause the sleeve to tear,
exposing the DVD drive mechanism.
2. Starting at one corner, slowly and carefully peel off the adhesive dust cover. If the dust
cover sticks too firmly to the drive sleeve, use a black stick or other nonconductive tool
to gently separate the dust cover from the sleeve. Discard the adhesive dust cover
when you have removed it.
Important: When reassembling the computer, apply a new dust cover after
the replacement DVD-ROM drive is installed.
3. To protect the display, lay a soft cloth between the display and the top case. Then
close the computer and turn it over.
®
Adhesive Dust Cover