User Guide

TITLE
PowerBook G4: No Video On External Device Connected Via S-Video
Port
Writer:
Created:
Modified:
Huckabone, Michael
2001-7-20
2001-8-17
TOPIC
Computer appears to work, but no video on external device connected to the TV out port
(S-video out port).
DISCUSSION
*RESTRICTED: Apple Specialists/Apple-Authorized Self-Servicing Providers *
Internal Use Only
Troubleshooting Procedure
The steps to solve a symptom are listed sequentially. You might not need to perform every step
before the symptom is solved. Start with the first step, and then test for the symptom. If the
symptom persists, replace any modules you removed, go to the next step, and test again.
Continue down the list until the symptom is solved.
The device must be connected to the S-video port while the PowerBook is sleeping or off
for the device to be recognized.
1.
If running Mac OS X, verify that this issue is also in Mac OS 9.2.
Verify monitor that is used in testing is known-good and is supported by this computer.3.
Try different cable(s).4.
Replace logic board.5.
Document Information
Product Area: PowerBook G4
Category: PowerBook G4 Hardware
Sub Category: Troubleshooting
Keywords: kpbook kssts hts
Contributor:
Process Owner: