User Guide
31
Linking to Another Sensor
Once your device links to a specic sensor, it’s set to link
with that sensor only. If you use a dierent sensor, you
must set the device to link to the other sensor. You may
want to do this, for example, if there’s more than one
person in your family with a sensor and Nike+ ready
shoes.
To link to another sensor:
1 iPod nano:
Connect the receiver to iPod nano.
2 Put on the shoes with the new sensor, and make sure
there’s no other Nike + iPod Sensor nearby.
Walk around to activate the sensor so that your receiver
can detect it.
3 Link the sensor to your device:
 iPod nano (5th generation or earlier):
Choose Nike
+ iPod > Settings > Sensor > Link, then follow the
onscreen instructions. A message indicates iPod is
now linked to the new sensor.
 iPod nano (6th generation) : Choose Settings > Nike
+ iPod > Sensor, tap Link, then follow the onscreen
instructions.
 iPhone 3GS, iPhone 4, and iPod touch:
Choose Set-
tings >
Nike + iPod > Sensor, tap Link New, then follow the
onscreen instructions.
Note:If you link to a previously linked sensor,
Nike + iPod detects your calibration settings. You
don’t need to recalibrate.